Things to Consider Before Choosing A New Heating System

The type of heating system you choose will have a great impact on your home’s energy consumption and monthly utility bills. It also impacts the comfort offered by these systems significantly. In case your existing heating system is more than 20 years old, and you are trying hard to keep it up and running, a better choice is to purchase a new system that complies with your home’s present heating and cooling needs. However, with many brands selling out in the market, selecting an appropriate model that conforms to the specific needs of an individual home is a real task.

Here are certain things to consider before placing your order for a heating system that lasts long and saves more:

Energy Source
Though natural gas is a common and most popularly used heating fuel, in many localities where natural gas is not abundantly available, home owners use propane or LPG for heating purposes. In places where climate is less severe, electric heating pumps are also a good option. The type of fuel used majorly depends on the ready availability in specific areas and also their relative costs. Contacting a professional heating contractor would give a better cost estimate for different energy sources.

Distribution System
Both – forced air and circulating hot water systems are efficient sources of distributing heat throughout the home. Forced air systems can be used to filter and humidify the air and for central air conditioning while you need to be extra careful with the duct seals for minimal leakage.
The hydronic systems distribute air more evenly and possess the ability to use the same boiler for domestic hot water. These systems are highly priced that the forced air systems while they do not provide central air conditioning, ventilation, or air filtering.

However, it is a wise decision to stay with the existing distribution system, unless you are thinking of major renovations.

Efficiency
Your heating system must be efficient enough to save you a considerable amount in your energy bills. Annual Fuel Utilization Efficiency (AFUE) are the standard efficiency ratings for heating systems that are used with propane, fuel oil systems, or natural gas whereas for systems that are used with electric heat pumps, Heating Season Performance Factor (HSPF) are measured.

Overall Costs
Cost is the game changer. Ultimately, your selection of a heating system would depend on the amount of savings it is going to yield – short term as well as long term. A qualified heating contractor would be able to suggest you better in this context.

All the parameters mentioned above are basic things which can be evaluated to arrive at a decision. Buying heating systems that are efficient, durable, and cost-effective requires technical understanding of the overall requirement. You can contact our experienced and well trained technicians at Dynamerican to assess your home’s specifications and suggest an appropriate heating system for domestic purpose based on the needs. You can reach us at 800-362-8490 or visit http://www.godynamerican.com/heating-system for more details.

Source: http://www.godynamerican.com/blog/things-to-consider-before-choosing-a-new-heating-system/

Benefits of Trenchless Sewer Repair Technology

Damaged sewer lines are among the commonplace issue faced by homeowners and call for immediate action. If ignored or left unrepaired, the repairs become more and more difficult. When a damaged pipe system finally blows up causing a major havoc, you might be left to think that the only option left is to go for massive excavations. However, for the past 15 years, with the emergence of trenchless sewer repair mechanism, the scenario of pipe repairs and replacements has dramatically changed. Trenchless services are an ultimate solution to new drain installations, clearing clogs, or replacing and repairing of sewer lines.

PROS

Enhanced Quality: Plumbers use state-of-the-art equipment to repair broken sewer pipes while replacing them with durable pipe system that will not corrode, crack or rust.

Cost effective: When compared to the traditional methods, lining sewer pipes save up to 75% to the residential and commercial properties. This method involves less hours and thus reduces the cost of labor needed to complete the task.

Eco-friendly: In the long run, the trenchless sewer repair technology will bring in huge savings while protecting the earth’s resources.

No-dig technology: No extensive excavation is needed with the innovative process of trenchless pipe rehabilitation.

Durable pipes installed: Professional plumbers will install pipes that are lined with epoxy resin. These can last up to 50 years. Thus, this is a non-invasive method of sewer repair and the preferably the wisest investment.

Versatility: When using the trenchless sewer repair mechanism, the traditional materials such as concrete, clay, cast iron are not used and so homeowners do not need to worry about any damages in future.

The Maxliner System is a kind of trenchless sewer repair technology that relines lateral pipelines without disruptive digging. We, the Dynamerican team are certified Maxliner installers. Our Maxliner products allow us to view the pipe defects with the help of a video camera to monitor your system internally as well as externally. for more details. You can also contact our technician at 800-362-8490. http://www.godynamerican.com/contact-us to discuss further.

How Does a Video Sewer Line Inspection Take Place

Sewer lines are the last things on your mind, isn’t it? Obviously no one would ever think about them unless they get blocked and a panic situation arises. So, a better idea is to have your sewer lines inspected by a professional plumbing professional service provider to detect any problems early before becoming an expensive repair. A proper inspection of the sewer line usually includes a special camera that inspects through the line and gives the plumber a good idea of the line’s condition and helps locate the clogs.

How is the video inspection done?

Video inspection of sewers usually involves a camera and an operator that displays the state of the inner walls of the sewers for a treatment action on the specific area. The following are some of the types of machines used for video inspection of sewer lines:

PUSH CAMERAS

Push cameras are the simplest form of video inspection and are widely used by many of the plumbing professionals. It includes a long cord with a push cam on one end which enters the pipe that needs to be inspected and sends live images to the plumber feeding the cord into the system. The camera is pulled back after the inspection is completed. This method works fine when the user knows which of the pipes has a problem.

LATERAL LAUNCH CAMERAS

Sewer problems can develop not only in the mainline pipe, but can affect the branching lines too. The lateral launch systems inspect the pipelines by adjusting and launching a secondary camera for an inner reach.

CRAWLERS

During video inspection with crawlers, a camera tractor with an attached flexible cable at its back runs through the sewer pipelines. The camera enters from an access pipe which then flows down the sewer through a manhole. The technician places the service truck right above the suspected pipe so that he can control the speed and movement of the camera to have a clearer view. Followed by this, the operator sets up the down-hole roller that in turn prevents the cable from causing any further damage to the top of the pipeline by rubbing. Once the set-up is done, the operator proceeds with further investigation by operating the camera tractor remotely from the service tractor. After completion of the process, the camera is removed by reversing the cable and gear.

A camera inspection can help detect blockages and corrosion and by having this inspection done before the occurrence of any problem saves you both time and money.

A sewer block can erupt at any time and be disastrously embarrassing. One of the best methods of preventing damage to your sewer line is to avoid washing down things like wet wipes, caustic liquids or grease down the drain. In spite of taking these preventive measures, experts suggest home owners to hire professional plumbing services and let them inspect the sewer lines at regular intervals to help detect potential issues.

Dynamerican offers exceptionally professional plumbing and drain services in North East Ohio. The team provides sewer and drain cleaning, video line inspections (esp. push cameras), high-pressure sewer jetting, grease trap installation, and back flow testing services. Contact our team now at 800-362-8490 or visit http://www.godynamerican.com/contact-us

Source: http://www.godynamerican.com/blog/how-does-a-video-sewer-line-inspection-take-place/

Make Your Home Energy Efficient Through Plumbing Fixtures

Loads of laundry, watering plants, or just having some fun at your home’s backyard – all of these tend to raise your water bills to unexpected numbers. While a simple solution would be to use less water, it does not always happen. Here is where you need the assistance of professional, high-efficiency plumbing fixtures. The Fixture of using less water than the standard usage while not compromising on performance - is well known to the professional plumbing servicemen.

Slight remodeling of your home’s plumbing systems would help you save on your water bills:

SHOWERHEADS

A refreshing shower can last longer than the normal time required, and why not? Everyone loves a nice hot shower. However showering accounts for almost 20% of the indoor water usage of a household. Professional plumbing services have alternative, high efficient showerhead solutions that would cut down the water use in showers to up to 70%. These showerheads use less than 2 gallons per minute which is quite a less amount than the traditional inefficient showerheads. The water pressure is less but sufficient to give you a strong steam.

TOILETS

Nearly 30% of the water used in homes comes from toilet usage. If your toilets were installed sometime before 1994, professional plumbers would recommend you to switch to high-efficiency toilet models that use no more than 1.28 gallons per flush. Another better alternative is to use a dual flush model that pile up savings immediately.

FAUCETS

People often forget to turn off the taps while brushing the teeth or doing the dishes. The good news here is that you can even save a lot while the tap is on with the help of high-efficient bathroom and kitchen faucets that consume maximum of 1.5 gpm which accounts for 30% lower use than the standard flow of 2.2 gpm. This can result in a saving of up to 700 gallons of water a year.

High-efficient plumbing services ensure that you save a considerable amount on your water bills. The Dynamerican team comprises of professional plumbers who offer professional plumbing services in Ohio since 1957. We have well trained technicians to install all types of plumbing equipment including sinks, bathtubs, toilets, hot water heaters, and pipe work. In case you wish to save energy consumption and utility bills, please contact 800-362-8490 or http://www.godynamerican.com/contact-us


Source: http://www.godynamerican.com/blog/make-your-home-energy-efficient-through-plumbing-fixtures/

Smart HVAC, Smart Home - DIY HVAC Maintenance Checklist

Some things must be really done ON TIME, EVERY TIME; whereas other things can be done once a year or seasonally. A healthy HVAC system means less maintenance and repair costs. A well-maintained HVAC system not only saves you money and energy, it also expands the lifespan of the device ensuring its highest efficiency. Your Heating, Venting, and Air Conditioning system has an interior unit consisting of a blower and an evaporator along with an exterior unit consisting of a compressor and a condenser. Below are a few steps that would save your equipment from unwanted problems and early replacement.  

A routine maintenance check-up procedure should include the following: 

Checking Thermostat Settings – Check the HVAC’s thermostat settings to ensure that the system does its job well. For this, you will have to switch from cooling to heating and raise the temperature slightly above the room temperature. If no heat kick sound is heard, make sure all the wire connections are secure or check the furnace fan, heat pump or blower. But contacting a professional would be a better option.

Lubricate the Moving Parts – An optimally working HVAC must serve energy savings. However, parts that lack lubrication result in friction and may cause maximum energy consumption. To lubricate, turn off the power and clean the caps after opening the cover. You can then lubricate the bearings by removing the caps.

Check and Clean the Heat Exchanger – A dirty burner or faulty (cracked) heat exchanger may cause carbon monoxide leakage and lead to disasters in the home. Also, an improper gas or oil connection can contribute to health related problems.

Inspect the Condensation Drain – It is important to constantly monitor the condensation drain of your heat pumps or furnaces as a plugged drain can affect humidity levels.

Check the Refrigeration Levels – Too little or too much refrigerant reduces efficiency in turn increasing energy costs. This may also reduce the life of the equipment.
Verify the Control of the Systems – This ensures safe operation. Check whether the system starts, operates, and shuts down properly.

Remove Debris and Free Up Surroundings – Cut off the plants that cover the condenser and remove the fan cage to clean the interior of any debris from the interior. Cut out the vegetation to up to 2 feet in all directions to allow generous airflow around the unit.

Performing these basic checks will enhance the HVAC system utility and extract most out of the equipment. Your plumbing services contractor can assist you through the process while you follow these DIY steps to maintain the HVAC at its optimal operational levels and increase the life of the equipment. Dynamerican has been in the industry since 1957 and understands the technicalities. With our well-trained staff members, we assure hassle-free functioning of your HVAC system. For any further assistance, please contact 800-362-8490 or visit http://www.godynamerican.com/contact-us.

Source: http://www.godynamerican.com/blog/smart-hvac-smart-home-diy-hvac-maintenance-checklist/   

Should You Replace or Repair Your HVAC System?

Do you think you are paying more than you think you should in energy bills? Whether it is a Yes or No, if your HVAC system is 10 year old, it is definitely time to perform a check and decide thereupon if it needs to be changed. Records show that nearly 40% of a home’s energy bills comprise of the energy consumed by the Heating, Ventilation and Air Conditioning (HVAC) Systems. Replacing or repairing the HVAC could help you save thousands of dollars in the long run and serve you better in the heating and cooling of your home.    

However, it is always suggestible to conduct a survey of your HVAC system for possibly costly leaks before spending thousands of dollars on purchasing a new heating and cooling system. This inspection would probably get you to the root of the problem which may be a lot less expensive to treat than to invest in buying a new one.

It is great to start with an overall energy assessment of your home by an energy efficiency professional – just a walk-through or a comprehensive audit with the help of a blower-door test that detects energy leaks by checking the pressure in the house. A check can also be performed for the electric utilities insulation. Thus, once you are sure that the insulation and seals of your house are efficient, you may get a clearer picture of whether you need to replace the entire system or just have a few repairs. Even though you decide to purchase, the energy assessment will help size your new HVAC system properly and run more efficiently, consequently saving your upfront costs and hiked energy bills in the future.

Hire Professional HVAC Maintenance Services

As heating and cooling systems are responsible for your home’s safety and health, it is always better to rely on professionally trained technicians who provide speedy and reliable installation, repair and replacement of the heating and cooling systems. An improperly installed and sized HVAC can lead to leakage of deadly carbon monoxide or other toxic gases into your home, escalate your expenses, and promote mold growth leading to fires or chronic illnesses. The most important job of a HVAC technician is to conduct a load calculation that considers extended variables including ventilation needs, insulation levels, windows, and local weather apart from the size of your house alone. To be well-protected and worry-free from the dangers of risking your home’s safety, hire the services of a professional HVAC installation and maintenance company and save a huge chunk of your savings and get an unbiased suggestion on whether to repair or replace your HVAC system.

Dynamerican offers premium installation and maintenance of HVAC Systems and has been in the business since 1957. Our services don’t let you suffer the extremities of heat and humidity by ensuring that your air conditioner is functional to its utmost efficiency. We have a strong base of customers who trust us for all heating problems related to base heating, central heating systems, thermostats, heat pumps, boilers, furnaces, and service maintenance. Please contact Dynamerican at 800-362-8490 or http://www.godynamerican.com/contact-us

Source: http://www.godynamerican.com/blog/should-you-replace-or-repair-your-hvac-system/

Dynamerican Plumbing Septic and Drain Cleaning Services Medina Akron - Ohio

Dynamerican Plumbing Septic and Drain Cleaning Services Medina Akron - Ohio